Synthesis of polyethylene oxide end‐capped with perfluoroalkyl groups/polystyrene prototype brushes

Polystyrene (PS)/poly(ethylene oxide) (PEO) prototype brushes were prepared by alternating free‐radical copolymerization of methacryloyl‐terminated PS and α‐vinylbenzyl‐ω‐hydroxy or α‐vinylbenzyl‐ω‐perfluoroalkyl (R_f) PEO macromonomers with the addition of Lewis acid (SnCl₄). It was found from their dilute‐solution properties that PS/PEO end‐capped with R_f (PBR_f), and PS/PEO having OH groups at terminal ends (PBOH) prototype brushes formed a single molecule in benzene and aggregates in chloroform, respectively. However, the brush PBOH formed a single molecule in N,N‐dimethylformamide. Such aggregation behaviors seemed to be caused by the interaction between hydroxy groups of PEO chain ends. The brush PBOH was also converted into PBR_f‐type brush by chemical modification, using corresponding acid chloride. The substitution of R_f groups was ～70% due to slipping of terminal hydroxy groups into PEO internal domains. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 772–778, 2006     

黑龙江化肥厂锅炉房用煤车、贮存、运输方案的优化设计

通过对原可行性研究报告中的锅炉房用煤采用筒仓群贮存方案的了解、分析、比较后,提出了采用矩形库贮存煤的优化方案设计的成果。     

Synthesis and properties of new polyamides based on a hydroxyethyl cinnamide extended from 3,5‐diaminobenzoic acid

A series of new aromatic polyamides containing cinnamide pendent units were prepared from 2′‐(cinnamide)ethyl‐3,5‐diaminobenzoate and various aromatic dicarboxylic acids by the direct polycondensation reaction, with triphenyl phosphite and pyridine as condensing agents. The polyamides were characterized by ¹H NMR, IR, and UV spectroscopy, and gel permeation chromatography. Their thermal stability was studied by thermogravimetric analysis in air, and differential scanning calorimetry. These polymers were readily soluble in polar aprotic solvents and can be cast from their solutions in flexible and tough films. Glass transition temperatures (T_gs) of these polyamides were observed in the range of 225–245°C. Their inherent viscosities varied from 0.77 to 1.12 dL/g that corresponded to weight–average and number–average molecular weights of 39,000–72,700 and 18,800–29,000, respectively. These polymers can be photochemically crosslinked. The photochemical aspects were revealed by means of UV–vis and IR analyses onto thin films. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2013–2020, 2007     

Tri-pyramid Robot: Design and kinematic analysis of a 3-DOF translational parallel manipulator

3-DOF translational parallel manipulators have been developed in many different forms, but they still have respective disadvantages in different applications. To overcome their disadvantages, the structure and constraint design of a 3-DOF translational parallel manipulator is presented and named the Tri-pyramid Robot. In the constraint design of the presented manipulator, a conical displacement subset is defined based on displacement group theory. A triangular pyramidal constraint is presented and applied in the constraint designs between the manipulator?s subchains. The structural properties including the decoupled motions, overconstraint elimination, singularity free workspace, fixed actuators and isotropic configuration are analyzed and compared to existing structures. The Tri-pyramid Robot is constrained and realized by a minimal number of 1-DOF joints. The kinematic position solutions, workspace with variation of structural parameters, Jacobian matrix, isotropic and dexterity analysis are performed and evaluated in the numerical simulations.     

基于离散元方法的竖直群桩冰荷载分析

在高纬度海域或高寒地区的江河中,碎冰对海洋平台桩腿和桥墩等直立群桩结构产生很大的冲击作用,并在一定条件下造成不同程度的破坏。依据碎冰在自然条件下的离散分布特性,采用Voronoi切割算法构造随机分布和具有非规则几何形态的碎冰初始状态,在此基础上采用若干个具有黏结-破碎功能的球形颗粒构造具有一定厚度、尺寸和形状等物理参数的河冰离散单元模型,将竖直群桩简化为刚体结构,从而对碎冰的运移及其对群桩的冲击作用进行数值模拟。在此基础上可确定碎冰撞击下的群桩冰荷载,并分析冰块尺寸、冰速和冰厚对桩结构所受冰荷载的影响。     

基团转移聚合反应中的有机硅引发剂

评述了近年来基团转移聚合反应中几种常用的有机硅引发剂(如单官能团引发剂、双官能团引发剂、其它乙烯酮硅烷缩醛引发剂、大分子引发剂及其它含硅引发剂)的研究进展,并展望了基团转移聚合反应在高分子合成中的重要作用及应用前景。     

Ⅱ型B族链球菌表面免疫相关蛋白基因的克隆和原核表达

目的重组表达Ⅱ型B族链球菌表面免疫相关蛋白(Surfaceimmunogenicprotein,SIP)基因,为进一步免疫学研究提供目标蛋白。方法用PCR的方法从GBSⅡ型标准株的基因组DNA中扩增出SIP基因,用T/A克隆法将其插入pMD18T载体,构建原核表达载体pET32aSIP,用BL21(DE3)/pET系统表达TrixSIP融合蛋白,SDSPAGE和质谱分析鉴定表达产物,并对表达蛋白进行初步纯化。结果PCR扩增产物经测序,证实与GenBank中Ⅰa/c型GBS的SIP的基因序列同源性为99%。SDSPAGE显示,经IPTG诱导后BL21(DE3)/pET32aSIP总蛋白中出现一条相对分子质量为66000的新蛋白带。质谱分析和蛋白质库的比较证实其为B族链球菌表面免疫相关蛋白(SIP)的可能性分数为74。结论已成功表达并初步纯化SIP,为SIP在细菌致病中的作用研究以及相关疫苗的制备奠定了基础。     

基于常见供水格局的水库群供水预警及响应策略研究

随着区域经济社会发展对用水量需求的增加,区域内逐渐形成多水库供水格局。本文针对一种常见的水库群供水格局开展供水预警研究,给出供水预警含义、预警指标及预警线形式、分级分期预警指标阈值确定方法和预警响应策略等。以缺水区域缺水量最小为目标,提出以水库蓄水量为控制指标的分级分期预警体系:即划定不同等级预警线,按照不同分期对预警线进行细化;基于长系列逆时序法供需计算确定预警指标;依据水库预警线确定水库群调水和供水规则,实现多水库联合调度。并以永康市三座中型水库组成的水库群为例,进行水库区供水预警及响应策略的实际应用。研究成果为水库调度决策部门提供了新的调度思路,为干旱期水库群供水运行管理提供依据。     

Synthesis of poly[(methyl methacrylate)-co-acrylamide] modified by titanium-triisopropoxide and their thermal stability

Poly[(methyl methacrylate)-co-acrylamide] of various compositions were previously prepared by the radical copolymerization reaction of methyl methacrylate and the acrylamide monomer in a solvent. The copolymers were modified through a resonating salt by the addition reaction of a chlorotitanium-triisopropoxide; the modified resins are called Ti hybrid copolymers. The chemical structure of acrylamide side chain groups in the Ti hybrid copolymers was confirmed by the ash weight after combustion, the characteristic absorption band determined by Fourier transform infrared spectrophotometry (IR) and elementary analysis (EA). The curing temperature and time of the resins were determined from the change in the insoluble resin weight when the extraction was done with a mixture of acetone and methanol using the curing resin samples. The thermal stability of the Ti hybrid copolymers was evaluated using both the thermal-degradation temperature (T_x) measured by thermogravimetric analysis and the thermal degradation at 130 °C for 720 h. The cured resins improved the weight loss of the resins at the T_x, and exhibited a high thermal stability.     

基于Monte Carlo随机模拟的综合交通网络布局评价与决策方法

针对综合交通网络评价指标权重及属性值具有主观性和随机性的特点,提出了基于模拟运算的布局规划方案排序选优的群体随机决策方法.仿真生成满足集结的多个专家对指标重要性偏好排序统计分布的权重,同时考虑交通需求的不确定性对指标值的影响,结合客观熵权计算方案的综合评价值,由多次模拟得到的排序优势度确定方案的优劣差异.根据设计的仿真流程通过算例说明了方法应用的有效性,评价中考虑了主客观因素及随机性特征,可以为网络布局提供科学决策依据.